Austria
ATUKHU


Company profile
News
Services
Quality
SmartCorr
Environment
Service for architects
Tendering texts
Assessment
Cleaning
References
Download
Request for quotation
Contact

Service for architects > Cleaning >  Print current page E-mail current page as link

The cleaning and maintenance of powder-coated surfaces should be according to the cleaning recommendations compiled in our data sheet ENV 801:

  • clear water, also with little additions of neutral or only slightly alkaline

    detergents

  • use no acid or strongly alkaline detergents or surface-active agents
  • use no scratching or abrasive means (only soft cloths or industrial cotton

    wool, no strong rubbing)

  • the maximum residence time may not be longer than one hour. If necessary,

    the cleaning work can be repeated after a minimum period of 24 hours.

  • use no organic solvents containing esters, ketones, alcohols, aromatic

    compounds, glycol-ethers or halogenated hydrocarbons or similar substances

  • greasy, oily or sooty substances can be removed with benzene hydrocarbons

    (prior tests on non-visible surfaces are an absolute MUST.) residues of glue,

    silicone-rubber or adhesive films etc. can also be removed this way An immediate

    removal is very important.)

  • flush with clear, cold water immediately after each cleaning

    process



Recommendation


New special effect on coating powder. [more]



ENVIRAL ® Oberflächenveredelung GmbH – A-7023 Pöttelsdorf, Viktor-Kaplan-Allee 3 – Telefon +43 (0)2626 50074 – Telefax +43 (0)2626 50074-74 – 0800 400 150